Quick Answer: Why Are Both White And Black Wires Hot?

Why would a white wire be hot?

This enables current to flow through the light bulb and power it.

If the neutral is disconnected anywhere between the light bulb and the panel, then the neutral from the light to the point of the break in the neutral will become hot (and the device will be unpowered, because no current will be flowing through it)..

Why are there 2 black and white wires?

Amazon.com: Customer Questions & Answers. My wall outlet has 2 black wires and 2 white (2 are the power in and 2 provide power out to another outlet). … The Ground wire coming out of this outlet is a green wire, this would connect to the bare copper ground wires that are connected you your existing outlet.

When can a white wire be hot?

White Wires With Black or Red Tape: Hot For instance, a white wire in a two-wire cable may be used for the second hot wire on a 240-volt appliance or outlet circuit. This white wire should be looped several times around with black electrical tape to show that it is being used for something other than a neutral.

What happens if I Connect the black wire to the white wire?

Inside an outlet’s electrical box, the black (hot) wire should be connected to the brass-colored terminal on the outlet. The white (neutral) wire should be connected to the silver-colored terminal. If these connections are backward, the polarity is wrong.

What if both wires are black?

Black means hot, white signifies neutral, and green indicates ground. However, if you need to rewire a light switch or a plug socket, you may occasionally come across two black wires. It’s essential that you determine which black wire is hot before proceeding.

How can I tell if a wire is hot?

Turn the power back on and identify the hot wire with the non-contact tester. Confirm that the circuit tester is working by carefully touching the hot wire with one lead and a neutral wire with the other. The tester will light if it’s working.

Which wire is hot when both are same color?

In most modern fixtures the neutral wire will be white and the hot wire is red or black. In some types of fixtures, both wires will be the same color. In this case, the neutral wire is always identified by some means.

What happens if you connect 2 hot wires?

You either have no voltage difference between the two wires, or you will get hot wires from opposite hot legs and you will end up with a 240 volt dead short. In that case you will trip at least one circuit breaker, or possibly 2. … If you bring two hots to the switch from the same phase, nothing will happen.

What happens if you wire a light backwards?

The fixture still works if you reverse the wires, but the socket sleeve will be hot, and anyone who touches it while changing a bulb can get a shock. When wired correctly, the socket sleeve is neutral and only the small metal tab at the base of the socket is hot.

Why are both black and white wires hot?

both black and white wires hot. like the title says both wires (black and white get or turn hot). To answer your question, Yes, that is correct. The reason you are getting 120 volts when the fan/light is on is because the voltage is feeding trough the motor or the light bulb (or both).

Which wire is hot if both are black?

The black wire is the “hot” wire, which carries the electricity from the breaker panel into the switch or light source. The white wire is the “neutral” wire, which takes any unused electricity and current and sends them back to the breaker panel.

What happens if you mix up hot and neutral wires?

This happens when the hot and neutral wires get flipped around at an outlet, or upstream from an outlet. Reversed polarity creates a potential shock hazard, but it’s usually an easy repair. … This wire is commonly referred to as the neutral wire, and it should always be white.

Should both black wires be hot?

Black means hot, white signifies neutral, and green indicates ground. However, if you need to rewire a light switch or a plug socket, you may occasionally come across two black wires. It’s essential that you determine which black wire is hot before proceeding.

Should there be voltage on the neutral wire?

Neutral-to-ground connection. Some neutral-to-ground voltage should be present under load conditions, typically 2V or less. … To check for reversed neutral and ground wires, measure the hot-to-neutral and hot-to-ground voltages under load. The hot-to-ground reading should be higher than the hot-to-neutral reading.

How do you tell if a wire is hot without a tester?

For example, get a light bulb and socket, and attach a couple of wires to it. Then touch one to neutral or ground and one to the wire-under-test. If the lamp lights, it is live. If the lamp doesn’t light, then test the lamp on a known live wire (like a wall socket) to make sure it actually lights.