Quick Answer: Who Do You Hire To Install A Range Hood?

How much does it cost to install a range hood?

“How much should I expect to pay a contractor to install my range hood?” In general, plan on about $200 to $500 depending on the complexity of your installation.

This includes the labor cost of installing a new vent hood and does not include parts, adding or modifying ductwork, or electrical work..

Do I need an electrician to install a range hood?

If you read the fine print, your warranty will probably state that the rangehood must be installed by a factory approved service technician. … If you need to have an outlet for electricity installed, only a licensed electrician can legally do this.

Is it easy to install a range hood?

Range hood installation can involve drilling a new vent hole through a wall, which can require new wiring and ductwork, while replacing old ones can be a simpler process. … Tip: Before you purchase a range hood, check the CFM rating of its fan. The CFM indicates the number of cubic feet of air the fan pulls per minute.

Do range hoods have to be vented outside?

Without question. It’s far preferable to vent the air outdoors than to recirculate it into the room. A vented hood that removes steam, smoke, heat, and cooking odors is the best way to keep your kitchen clean, since it gets rid of grease particles that would otherwise accumulate on your walls and cabinets.

How does a ductless range hood work?

Overview: Unlike a ducted range hood, which vents air to the outside, a ductless range hood consists of a fan (or a blower, motor) with a charcoal filter that sucks up grease particles, heat, smells, and smoke, filters it, and then recirculates it back into the kitchen.

Are range hoods hardwired or plug in?

Although many stove hoods come with the option of either installing them as a cord and plug connected appliance or as a hardwired appliance, hardwired is the preferred method.

Do ductless vent hoods work?

A ductless (or ventless) range hood does not vent out of the home, instead, it carries the debris and smoke form the air and filters it through a charcoal or carbon filter before releasing it back into the room. While many times this method is not as functional as a vented hood, it does work.

Do I need a vent over my stove?

Your Stove Just Needs to Vent. THE stovetop range hood may be the most underused and undervalued thing in the kitchen. It is designed to whisk away odors and health contaminants released by cooking, but most of us switch it on only when we burn something — and some of us don’t even have one.

How high should a range hood be from the stove?

In general, most installations require a distance from 20″ to 24″ between the bottom of the hood and the cooking surface. Over a gas range, this distance should be between 24″ and 30″, unless otherwise specified.

Can I paint my range hood?

Painting your range hood is a cost-effective way to update your decor. A variety of paint colors are available to fit your needs, but note that, to paint a range hood, heat-resistant appliance paint must be used.

Will Home Depot install range hood?

Inquire with The Home Depot about vent hood installation or installing a range hood vent. Over the range microwave installation and built-in cooktop installation is available through our appliance installation service as well.

Which is better ducted or ductless range hood?

Ducted range hoods release all the smoke and odors to the outdoors instantly, which makes them easier to maintain than ductless models. Ductless range hoods need more power to operate, as they have to suck in dirty air through the filter before blowing it back into the kitchen.

What should I look for when buying a range hood?

These are some range hood features to consider.Airflow. Manufacturers tout the cubic feet per minute (CFM) of exhausted air. … Number of Fan Speeds. Most of the hoods we tested offered from three to six fan speeds. … Thermostat Control. … Exhaust Timer.

Can you install range hood without cabinet?

There are hoods meant to be installed without a cabinet but they tend to be expensive- see Faber wall chimney. If you want to install an inexpensive e.g Broan hood, you could install a shelf with brackets and install the hood to the underside of the shelf.