Unusual DIY Clear Glass Memo Board

How to Make a Custom Dry Erase Board Without a Custom Budget

Unusual DIY Clear Glass Memo Board

During my office remodel, we DIY gold dry erase boards. They look great on the walls, but also help me stay organized. They also add tons of glam to the office, even though they were cheap. That’s a win in my book!

To make your own board, start with a picture or poster frame in whatever size you would .

Tap on the front before purchasing and make sure it is real glass. If you leave dry erase marker on the plexiglass too long, it will etch the surface.

Next, you’ll need spray paint in your desired color.

I used a gold mirror effect spray paint. It’s the secret sauce that makes the surface of my boards reflective and rich. You’ll also need a clear, matte topcoat spray. 

Since the project uses spray paint, we put up our HomeRight Spray Shelter to protect the garage floor and cars from over-spray.

Remove the glass from your frame, if possible. If it’s being endlessly stubborn, that’s okay too. Just use painters tape around the back of the frame to protect it from over-spray.

You need to be working on the BACK of your glass.

Shake up the gold mirror finish paint, and apply a light coat using a sweeping side to side motion. Make sure your spray extends all the way to the end of the glass.

After one minute, it’s already time for the 2nd coat.

For the second coat, we switched directions as you can see in the photos.

Add three additional coats, one minute apart, continuing to alternate directions between coats.

A few minutes after the 5th coat of gold is applied, spray on the matte clear topcoat.

This IS mandatory. I didn’t do it the first time, and learned how easy it is to mess up the gold finish without the sealer.

The hardest part is next. Walk away and let that sealer dry for 24 hours before you continue.

Patience is difficult when you’re ready to see your project!

When the sealer has cured, you just have to put the back on your frame and hang it on the wall. So easy!  

Corey lettered a quote onto one of the boards for me to add some extra inspiration. 

We also made three smaller gold dry erase boards to use as calendars. I started with 16 x 20″ IKEA RIBBA frames, and followed the same steps above.

Then, I cut a grid white vinyl using my Silhouette Cameo machine and applied it to the front of my glass. If you don’t have a vinyl cutter, you can get the same effect using a roll of white striping tape. 

The month name and date numbering was done with a white dry erase marker. I left space below the grid to add any notes or reminders.

Each RIBBA frame sits on a 1×4 mounted to the wall. This wouldn’t work with all frames, but they have the perfect deep back.

When I was brainstorming calendar solutions, I kept finding ideas online that would leave me rewriting everything each time a month changed.

With my three board system, as each month passes, the boards just move up a slot on the wall. The top board will get erased and reused as the bottom board. Each board ends up in use for a full three months.

I’ll use a mixture of writing directly on the boards, and Post-It notes to keep the schedule updated. The Post-It’s are perfect for planning out my blog posts, as post dates can change. When that happens, I’ll just move the sticky note.

Are you going to try this? Let me know what color board you’ll be making in the comments below!

Source: https://www.polishedhabitat.com/custom-dry-erase-board/

Glass Whiteboard, Glass Dry Erase Board, Clear Dry Erase Board

Unusual DIY Clear Glass Memo Board

Available Sizes 16″ X 16″, 24″ X 36″, 36″ X 48″, 36″ X 60″, 48″ X 60″, 48″ X 72″, 48″ X 96″, Custom
Shapes Rectangular, Square, Custom
Magnetic Yes
Glass Thickness 3/16″ (5mm)
Mounting Options Floating, Standoff
Accessories Marker, Magnetic Eraser and Rare Earth Magnets
Hardware Stainless Steel Mounting Hardware
Available Colors White, Black, Light Green, Light Blue, Peach

This standoff scraper holds the magnetic wall board from the edges. These pins provide great edge- grip to the heavy-duty boards as they get installed deep in the wall. With each large magnetic glass board purchase, we also provide a complete hardware kit that includes everything needed for mounting on glass, acrylic, or metal with a custom design on it. That helps standoff systems to result the perfect balance with a sophisticated style to a heavy board. The standoff pins have caps on them to make sure the board is installed firmly on drywall. But always keep in mind to not overtighten these solid studs; overtightening can break the glass marker board. This wall mount device comes in different sizes with your preference of finish and board size. Though reasonably priced, these solid standoffs pins bring a pricey look to any glass board panel.

With the many outstanding features that our magnetic glass dry erase board offers, it is quite clear that schools, hospitals, offices, and even homes need to have this product for better presentations.

These magnetic wall boards are indispensable for institutions that want to improve their service and information delivery.

So how can you take good care of your glass whiteboard to maintain its long-lasting durability?

By installing a magnetic glass dry erase board, you can make your workflow more efficient. Your office will become a convenient place to display all of your daily reminders, notes, and schedules. The magnetic glass will also modernize the appearance of any working area. Additionally, images, branding, and company logos can be displayed to the glass magnetic whiteboard.

These magnetic glass erase boards are a perfect item for your personal library and study room.

Designed to be more useful than traditional notepads for rewriting and practice, our products hold an aspect of décor.

It could be an amazing idea to use a magnetic glass board to showcase your drawing catalog, any kind of creativity, listing things or simply attaching family photos on it with super strong magnets.

You can be freed by tons of files a bit, by setting up an editable greeting board in your reception room. It can be used to schedule appointments and leave messages for staff and patients as well. If you have lots of child patients visiting you, it can also be used to draw fun pictures. Pick different colors to add life to your space.

Due to the fact that they feature a smooth surface that’s eco-friendly, easy to clean, and fun to write on, magnetic wall board is the best option for any place of learning. Moreover, different colored pens can be used to keep students attentive and escalate their learning speed.

The number one step in maintaining your magnetic glass dry erase board is ensuring that you use the right accessories. Ensure you use the right erasable marker and avoid permanent markers that are hard to erase once used.

Also, use the right quality eraser that does not leave traces of ink on the surface. The best thing about our clear glass dry erase board is that it is easy to clean and dries quickly. You should also keep your markers tightly capped whenever you are not using them.

This is to ensure they last longer and can be easily erased once used.

Although our clear dry erase board can erase easily, but it is always good to wash the board once in a while. In some instances, you might use markers that leave a film after erasing the board. This film can build up over time and make your writing surface fade.

That is why we recommend using our accessories, rather than utilizing low-quality markers and erasers from rogue manufacturers. You can use a spray-on glass cleaner to get rid of such haze on your board.

To keep your magnetic eraser board in -new condition and to avoid soil marks that arise from oil, dirt, and paint, you should position your board away from the floor You should position your board away from the floor to avoid soil marks that arise from oil, dirt and paint among others.

You can avoid such problems if you buy online large magnetic boards from us because it is easy to install. These are some of the few measures you could take to keep your glass board in good condition.

The use of glass boards has become indispensable in almost every institution.

There is increasingly high demand for top-quality magnetic eraser board in learning institutions, hospitals, conference facilities, residences, restaurants, and more.

One of the best ways to ensure that you get the best eraser board is to sort through its features. Our clear dry erase board has become everyone’s favorite due to a number of features:

We offer a wide variety of large magnetic boards in various colors to ensure you get what you want. You can buy the right clear glass dry erase board that blends well with your room.

Do you have any questions regarding our clear glass dry erase boards? Feel free to give us a call at 1-888-474-2221.

Whether you need assistance choosing the right magnetic erase board for your application or need help with installation, we’re here to help. Thanks for choosing Fab Glass and Mirror!

Source: https://www.fabglassandmirror.com/glass-boards

DIY Memo Board Tutorial

Unusual DIY Clear Glass Memo Board

Staying organized is key to running a busy household. I love the idea of having a calendar, shopping list, to-dos, or other notes all organized and in one spot.

I decided to create my own DIY Memo board using a long poster frame, a bit of paint, and few pieces of masking tape a little bit of time.

This is a really easy and fun project you can even do with your kids and tweens and is perfect to get your family organized for back to school!

I received a Cricut Explore for review. All opinions expressed are my own. 

DIY Memo Board

Supplies:

  • Picture frame of choice
  • Paint, color(s) of choice
  • Masking tape
  • Dry erase markers
  • Cricut Explore
  • Vinyl, color of choice

Pull apart your frame and decide where you want to paint.

You can paint directly on the back of the sheet of glass or directly to the pressed board at the back of the frame or you can even layer the back of your frame with cute scrapbook paper or photos. The choice is completely up to you.

I painted directly on the pressed board that formed the back of my picture frame. My frame didn’t have a glass front, just a plastic piece so I didn’t want to paint directly on that.

I started by measuring the area available to me and marking off what space I would for what different areas of my memo board.

I decided to section off an area for a weekday calendar, chore chart, and a bonus flex area at the bottom that could be filled with other notes as needed such a a shopping list, phone messages, or important reminders.

You could make areas for a dinner menu, shopping list, phone messages, baby sitter reminders, homework checklist, or whatever you may need for your own family.

Using a ruler and a pencil and masking tape, section off the areas for the different paint colors you’d to paint or paint your entire board one single color. I chose a few colors to carry the main colors of our family room into our connected open floor plan kitchen where our DIY memo board would hang.

Paint each section, allowing the paint to dry and apply a second coat as needed. Then remove any marked off areas and switch to your other paint colors. I started with two paint colors for alternate areas that wouldn’t be touching and then after those areas dried I switched to the two bordering paint colors.

Next, I designed all of the words I would be using for my DIY memo board using my own fonts and PicMonkey to quickly collage them together and rearrange them.

Then, I just uploaded my image with a transparent background to Cricut’s online platform used for preparing your design.

I loved that I could put in whatever my own design ideas were, and then the Cricut Explore could use that design and cut it for me!

You can grab a free copy of my Vinyl Memo Board words here! Just click the link to view the image full size and then right click and choose to save the image to your computer!

After the design was cut out, I cut out each word and peeled off the excess vinyl. I then used a piece of contact paper to lift off the letters onto the contact sheet and then transfer them all neatly in a row to the board.

You can also print your designs in reverse, if you want to apply the letters to the back of the glass, rather than your board.

I just applied them directly to the board as the different painted sections made it easy to line up the letters straight.

Now you can re-assemble your frame back together. You can now use dry erase markers to decorate and fill-in your memo board.

The really nice thing about having all of your main words directly on your board and under the front piece of glass on your frame is you can really easily wipe-off and clean your frame without those base words being affected. Finally, hang your memo board and start using it to keep your family organized!

Cricut Explore Review

I have been really impressed with all that the Cricut Explore can do! It gives you the ability to design on a variety of formats. You can cut vinyl or paper for scrapbooking, home decor projects and more.

Or cut out fabric, wood, leather, and others! If you don’t want to cut, no worries.

The Explore has a second head so you can load in a pen and create poster boards or greeting cards – even being able to write and cut in one step! Check out this cute Thank You card design they made by writing and cutting in one step!

The Cricut Explore gives you the flexibility to shop from their design store to have easy inspirations that are ready to hit print and start your design, just the card above.

Or, you can create your own projects that can be loaded into the Explore. Designs can be purchased one at a time or choose a monthly subscription access.

They have over 50,000 images ready for you to try! The Cricut Explore can also accept any cartridges you may already own from previous Cricut machines.

The design center took some getting use to, but the Cricut machine itself was extremely easy to use. I love that it has built-in places to store tools and accessories, so everything stays together. I’m already dreaming up my next projects!

What sections would you add to your DIY Memo Board?

Source: https://www.amomstake.com/diy-memo-board/

Creative Bulletin Boards to Craft

Unusual DIY Clear Glass Memo Board

Turn salvaged items, fun crafting supplies, and a little creativity into bulletin boards! Whether you're looking to get organized, display more photos, or transform a tired corkboard, these ideas are stylish and easy.

Pull out the stops to use salvaged corks for this floral-theme corkboard that is anything by boring. Form the flowers by strategically positioning stained cork ends faceup. Use a deep frame or shadow box to accommodate the depth of the corks. To stain the corks yellow and orange for the flower centers, brush watered-down acrylic paints onto the cork ends.

Advertisement

Advertisement

Refresh your message center with a magnetic bottle-cap board — no caffeine required! Find vintage bottle caps on e-commerce websites, such as Etsy.com; then arrange and glue them into a frame.

Use additional magnet-backed bottle caps to attach notes on the display. Before adhering the bottle caps inside the frame, cover the frame backing with pretty patterned paper.

Use heavy-duty glue, such as epoxy, to attach the bottle caps to the backing.

Chalk up this noteworthy idea to a salvaged contractor's ruler folded on its hinges into a square and used as a frame with a chalkboard backing. Cut a board to fit the back of the folded-ruler frame, paint it with chalkboard paint, and screw it onto the back of the ruler frame. The frame will be multiple squares deep, making the perfect ledge for pieces of chalk.

Advertisement

Add this idea to your crafting itinerary: Commemorate a special destination with a map-covered papier-mache letter. Use decoupage medium to adhere a map to the front of the letter. For extra durability, brush the surface with a second coat of medium and let it dry before adding flag-top pins to mark your visits or favorite cities.

Are you being served? Give a seldom-used wooden tray a new role to play as a photo display. Paint it with yellow and chalkboard paints and add notes highlighting your favorite snapshots.Once painted, wrap a picture-hanging wire through the handles and across the tray front. Twist the wire ends together on the back of the tray. Mini clothespins make perfect picture holders.

If a dresser is too junky to save, use one of its drawers for a creative bulletin board. Paint the drawer to renew its life. Then cut corkboard to the size of the inside of the drawer and glue in place. Cover the board with pretty paper. Hang the drawer on a wall above a desk, and set decorations on the bottom for an interesting display.

Advertisement

Advertisement

Put a collection of wine-bottle corks to good use as a clever display board. Choose a frame deep enough to house whole corks, or cut the corks in half lengthwise using an extra-fine razor saw (available at hobby stores). Attach the corks to the frame backing with wood glue.

Update an old cookie sheet as a magnetic bulletin board for a quirky way to display treasures. Glue a bright piece of wrapping paper to the inside of a cookie sheet. Fun magnets make it easy to embellish the board when hanging mementos.

Find tea towels large enough to wrap around discount store cork bulletin boards. Spray the fronts of the boards with adhesive, then press the towels to the boards, smoothing out air bubbles by hand. Wrap the fabric around the boards and stapled to the back for a hip way to liven up your office space.

Advertisement

Make your own focal-point bulletin board by mounting cork squares to a wall, covering them with grass cloth, and attaching molding around the edges for a frame. Rim the inside of the molding with eye-catching ribbon to double the bulletin board¿s impact.

Keep the colors of your bulletin board neutral for a vintage look that will match any room. Wrap a corkboard in off-white fabric. Then place it in a white frame. Hang string across the top with pushpins for an easy way to display mementos.

Your jewelry deserves to be put on display. Place fabric over a corkboard and glue to the back. Paint a picture frame in a matching color. Place the corkboard in the frame, then hang your jewelry with simple pearl-head pins.

Advertisement

This bulletin board is fit for a queen. Cover a corkboard with gray or silver fabric and staple to the back. Make a crisscross pattern from green velvet ribbon and hold in place with decorative gem pushpins. Apply bling embellishment tape to the ribbon for added sparkle. Attach feathers and beautiful flower accents for a royal finish.

An old frame with inside matting provides the perfect display for a bulletin board. Fit the corkboard to the center of the frame in place of glass. If the frame is beat up, spray-paint it a tarnished gold for a finished look. Simple pushpins make sure not to overwhelm the beautiful wall hanging.

Sometimes one bulletin board just isn¿t enough, especially when they¿re as pretty as these two. Wrap a frame in colorful fabric. Hot-glue the fabric to the back of the frame, pulling it tight as you go.

Then, hot-glue corkboard cut to size to the back of the frame. Attach two lengths of matching ribbon to the top with small nails, letting the ends hang over the front.

Hang the frames side by side for a uniform look.

Advertisement

Give your office space a pick-me-up with these retro bulletin boards. These three corkboards were wrapped in bright wrapping paper and framed in bold black. Add large black embellishments, such as big letters, for a fun backdrop.

Not all bulletin boards have to hang from a wall. Cover the front of a standing picture frame with a patterned piece of paper. Glue a piece of corkboard to the front. Add button embellishments in coordinating colors. Then pin on pictures and treasures with decorative pins.

If your bulletin board is taking center stage in your room, make it a piece of art. Earn style points by adding a gray decal over the cork and displaying the board in a chunky black frame. Or paint your own design to match the theme of your room.

Advertisement

A fabric-lined corkboard gets an easy update with small sealable plastic bags. Colorful pushpins hang clear bags filled with small trinkets and office supplies.

Editor's Tip: If your supplies are unsightly, hang small cloth bags instead.

Turn even the smallest fabric scrap into a fun bulletin board. Stretch fabric over a piece of corkboard and glue in place. Glue two strands of ribbon across the corkboard. Use patterned clothespins to hang notes or pictures from the ribbons. Then, place the corkboard in a frame for a bright display.

Intricate designs aren't hard to achieve. Search scrapbook supplies for different-shape die cuts. Place them on the corkboard in a fun pattern. Spray-paint the corkboard and let dry. Then remove the die cuts for an interesting layout. Paint a border and add coordinating pushpins to complete the look.

Advertisement

A pretty bird applique is a great way to display a favorite hobby and provide a background for your pins. Cut a bird pattern from fabric and use fusible webbing to attach the bird to the corkboard. Add striped ribbon to the outside of the corkboard and flower embellishments with gem brads. Place the corkboard in a painted frame.

Source: https://www.bhg.com/crafts/easy/1-hour-projects/creative-bulletin-boards/

Turn Any Flat Surface into a Dry Erase Board

Unusual DIY Clear Glass Memo Board

Oops! Have you ever said something you wish you could take back? It happens to me regularly. You’d think I’d be used to it by now. Well, here I am again.

I wrote this great post, but then the next day, realized it was wrong! My dry erase board doesn’t erase, if you leave the marker on it to dry more than a day. I didn’t realize this until after it was out there all over the internet.

However, I found that it does work great if you use regular markers on it, then erase them with a damp paper towel. The process described below still applies, and you get to use regular markers without all the chemicals of dry erase markers.

So I decided to let the post stand, with a few corrections throughout (in red). I hope it’s still helpful to you, even though it’s really just a marker board, not an actual dry erase board. Read on to see what you think and feel free to leave me feedback in the comments!

I have more dry erase boards, message boards, chalkboards, and magnetic list pads strewn around my house than I care to admit. I keep thinking the next one will be just the thing to get me organized. Turns out, it helps if you actually use them.

Well, for me to use something consistently, it also helps if it’s cute. Enter my new find from Target. I found this piece of wall art with a cute yellow chevron pattern, that’s just tailor-made for my office. Now, what to do with it? Turn it into a dry erase marker board of course!

~This post includes affiliate links. If you make a purchase, I’ll receive a small commission at no extra charge to you. Thanks for supporting The Palette Muse!~

I was inspired by Rustoleum Dry Erase paint. But then when I went to buy some, I sadly discovered that a small quart sized bottle costs about $20. Hard to justify that expense to embellish my $3 clearance find. But by now I was determined to find a way. Next I tried Mod Podge.

Y’all know I love my Mod Podge. I figured since it dries to a nice gloss finish, it just might do the trick. Well, in a way it sort of worked, but I couldn’t get it painted on smoothly enough. I could mark on it with no problem, and it erased fine, but the ink got stuck in all the brush marks.

There had to be another way.

Finally I remembered using contact paper on another project, and how smooth it felt to the touch. I wondered if that would work? And it did! a charm. (For a while.) So for an extra $5, I was able to finally get my cute dry erase marker board. I just know this will be the one that keeps me organized!

Here’s how to turn any flat surface into a dry erase marker board, for less than the cost of the markers you’ll use on it…What you’ll need to make your own marker board:

  • Something with a flat surface. This would be really cute to do with a photo, or even scrapbook paper glued to a piece of wood or foam board
  • One roll (or much less) of Contact paper, the glossiest finish you can find
  • Scissors
  • Pen or pencil
  • Squeegee or something similar with a flat edge, a ruler or a credit card

Marker Board Process:

  1. Make sure your flat surface is clean and dry.
  2. Measure and mark the contact paper with the dimensions of your project.
  3. Cut the contact paper and carefully remove the backing paper.
  4. Affix it gently to your project. You can re-position it if it’s not quite right.
  5. Working from the center toward the edges, use your squeeqee or flat edge to smooth out all the bubbles and wrinkles.
  6. Write yourself a fun, congratulatory note on your new board, using regular markers, such as Crayola. Then simply wipe off with a damp cloth or paper towel.

Quick tip: Do you ever get residue on your boards from dry erase markers that won’t quite erase? A quick swab of rubbing alcohol will make that board as good as new.

It also works on walls that have been, um, “decorated” with errant dry erase markers in the hands of an enthusiastic toddler. This part is still true!

See how organized I am now?

Anyone need some contact paper? I now have a 24 foot roll, with about 1 foot of it missing. Oh well, I’m sure there will be another project some day….

Update: I’ve since found actual dry erase sheets that look they’d be a better fit for this project, if you want to use dry erase markers. You would follow the same process as this one to apply them to your surface. So there you have it, two ways to make a marker board or dry erase board!

Source: https://thepalettemuse.com/turn-any-flat-surface-into-a-dry-erase-board/

16 DIY Cork Board Projects

Unusual DIY Clear Glass Memo Board

  • Caylin HarrisThis clever cork board includes fabric pockets, so it doubles as a small storage space as well as memo board. With a few simple supplies, you can transform a $10 craft store cork board with fabric and paint for a piece that's both cool and functional.
  • The Beauty DojoTo create a simple and modern cork board, use painter's tape to make of a variety of asymmetrical shapes. Next, fill in the areas not covered in tape with matte white paint. You don't even need to wall mount this one. Simply lean the finished cork board on your desk. 
  • Pastels and MacaroonsYou don't have to drink a bottle of wine a night to complete this DIY cork board project. Instead, ask friends and family members to collect their wine corks, and you'll have enough before you know it. If you really want to try this project out but don't have a wine cork collection just yet, you can buy an assortment of unused corks online.
  • Two Twenty OneSome people don't have the space for a home office so they utilize command centers. However, these organizers can get cluttered and look messy. Hide the mess by installing a cork board on the inside of a commonly used kitchen cabinet. This way, you will be reminded of your tasks multiple times a day, but won't necessarily have it in your face all the time.  Continue to 5 of 16 below.
  • Little House of FourTo remake this DIY cork board, roll out a sheet of cork and cut it into 3×6 inch rectangles. Adhere the cork tiles on a white plywood base in a herringbone pattern using spray adhesive. Once hung on the wall, layer on a variety of accessories, pictures, and functional notes.
  • FiskarsThis is a fun cork board project to tackle for anyone that experiences occasional or frequent wanderlust. Get inspired by exploring new places you want to travel and tack off the ones you've already visited. You could even create a color system with pins that can rank destinations desirability. 
  • Katelyn BrookeIt's simple enough to frame a cork board and use that to hang jewelry. However, to make the organizer a focal point in a room, create a large square using four cork boards. Next, use stencils and paint to add different patterns to each board. 
  • Young House LoveIt's one thing to put up a cork board on the wall for your child's art. It's an entirely different thing to create an accent wall for said art. Pick a large space between two windows and use cork board squares to recreate this feature wall.  Continue to 9 of 16 below.
  • Bre PurposedBuying a cork board organizer in the store is relatively effortless, but most of them look exactly the same. This DIY cork board project utilizes round cork board plant coasters to make this feminine and chic wall organizer. 
  • Hip Mama's PlaceTo complete this DIY cork board project, you can either buy cork coasters or purchase a sheet of thin cork and cut them out yourself. Next, pick two or three colors of acrylic paint and use stencils to make the coasters your own. 
  • Look What I MadeThis monogram cut out is functional, and it's nice to look at on a desk. To make the project your own, go online and pick out a simple yet decorative font. Print a large and bold version of the letter and use that as your stencil. 
  • The Inspired HiveCoordinate your office decor with your wall cork boards with this next tutorial. This clear glass planter is completely transformed using a roll of cork and some white paint. If the white is too simple, try out different colors black chalkboard paint for a different feel.  Continue to 13 of 16 below.
  • Creme de la CraftThis cork sheet tutorial can be reimagined into other pouches a laptop case or a purse. The cork is soft yet durable enough to protect electronics from basic wear. If you drop expensive electronics often, consider adding an extra layer of padding.
  • Design for MankindThese cork trivets are transformed into a functional desk accessory using glue and a drill. If you have enough space on your desk, make the organizer large enough so you can pin on notes to yourself. 
  • JulepHexagon cork boards can be put together in a variety of ways. Keep it simple or consider layering the boards in an asymmetrical pattern. To add another element to this DIY cork board, paint half of each hexagon a different color that will coordinate with your decor.
  • Kojo DesignsWe love this last cork board idea! First, pick out a powerful, short word for your cork board. The word “make” works well for a craft room, but you might opt for a word “work” for an office setting. You could also use the word “play” for a playroom or “bake” for a kitchen. Next, pick a simple font, create a stencil, then cut out the letters from a cork board sheet.

Source: https://www.thesprucecrafts.com/diy-cork-boards-4582417

The DIY Clear “Whiteboard”

Unusual DIY Clear Glass Memo Board

There are a lot of questions I get as a therapist, but the above question is one I get a lot of from clients…and from other therapists.

I would to say that I came up with the idea myself, but I didn’t. Rather, my good friend Aubrey McGowan was the brains behind the idea and he helped me make it happen. He even came over to my office and helped me hang it (actually, I sort of watched him hang it–I just lended some help).

I always wanted a big glass whiteboard in my office, but just didn’t feel I could afford the cost of one. They can range from several hundred dollars for a small one, to several thousand for a large one. So when I saw Aubrey’s church, Hope Fellowship in Frisco, using a clear board on stage I asked him about it.

How To

  1. The plastic I am using is called Lexan. So I contacted a plastic supply company in Dallas (in my case, Allied Plastic Supply). I found that contacting a plastic place and having them cut it for you reduces cost even more.
  2. Choose your size. I went with a 4′ x 6′ board which is pretty big. And I chose a thickness of about 1/2″. Obviously the bigger the board and thicker it gets, the heavier it gets. But to keep it from flexing too much when writing, I chose this thickness.
  3. Do you want it to be clear or sand blasted on back? I chose clear, but I’ve seen some sand blasted which gives it that kind of “fogged” or “smoked” look.
  4. Do you want them to drill holes in the board for when you hang it up? I did — I had them do 6 holes to fit the mounting bolts I was using. (see below)
  5. Have them go ahead and cut it for you; choose clear or smoked/fogged; pre-drill holes. And now you are done.
  6. Since the board can be heavy I just recommend having a friend help you hang it on your wall. I’m not very handy when it comes to construction, so just make sure you are using screws/bolts that will mount into the wall nicely.

Pros

  1. Functional
  2. Looks cool
  3. Different from what you usually see
  4. Mistaken as art (actually some people think I have an art installation piece in my office)
  5. Cheap: I paid about $180 for the board. And about $20 for the screws/bolts.

Cons

  1. Sometimes is hard to clean. You will notice some darker smudges on my board (in the picture above). I just have to work hard on keeping it clean. I use a spray about once a week on it. Mine is organic cause I was told that the chemicals might mess with the Lexan. But I know others who use 409, Windex, etc and it works great for them.
  2. Reflects a lot of light. So if my window is open ( it is in the picture above) you can see a lot of light reflection. You can also see my lamp reflected. So you may have to close the blinds at certain times of the day me.
  3. Some colored markers do not show up well. I use EXPO Bold Color Dry Erase markers. I feel these markers work better than the non-bold ones. The older version of these markers would stain my board, but they have been changed since then and work well. Black and red works well, but I find green, blue and other colors to now work so well.

It’s been a great board for me and I’m thankful for it’s low cost and functionality. I hope this helps. If you have any questions, let me know.

Source: https://rhettsmith.com/2013/02/the-diy-clear-whiteboard/

DIY Upholstered Gothic Memo Board

Unusual DIY Clear Glass Memo Board

This project has put such a smile on my face!  I am absolutely in love with the way it turned out…. but mostly… until this project was complete, I had no idea how much I desperately needed a gothic memo board.

  Actually, I need five of these!!  As someone who currently chases a toddler around every waking moment….

and tries to sneak in time to manage this blog and run an Etsy business… I desperately need some help with time management, focus, and organization!!  Not sure if I’m going to use this board as a planner or as a vision board, but either way… it’s going up on my office wall ASAP!!

When I found this frame at the thrift store I wasn’t sure of what I wanted to do with it.  I d the shape…. and I rarely turn away from an ornate carved wood frame… it had potential to be cool.

  The frame had some damage, but nothing a sander couldn’t fix.

 I also loved the price!   You’ll find that thrift stores charge a fraction of the price for frames that don’t have glass, so I got this one for $3!!

It’s clear that whomever owned this piece before me had also attempted a DIY project. It is also clear that the former owner had no taste.

 My god – what is with that country plaid ribbon?!  I buy a lot of ugly pieces with the intent of making them beautiful… but this one got to me!  I could not stand looking at that awful ribbon while I pondered what to do with this frame, so off it went.

 The ribbon had actually been hot glued to the cork… to cover up the fact that instead of having a sheet of cork cut to fit the frame, someone pieced cork together and the seam was visible…  That ribbon was some cowgirl’s idea of a fix.  When I ripped it off… the glue had damaged the cork board.

At that point, I had been leaning towards turning this frame into a chalkboard or possibly one of my Framed Chicken Wire Projects…. but the more I looked at that damaged cork board, I started to the idea of keeping this frame as a pin board.  My initial thought was to buy a new piece of cork (one that actually fit the frame), and paint it….

maybe black (no shock there)… or red, or white, or purple.  But upon investigating tips on painting this type of surface, it started to sound a bad plan.  Apparently, unless you paint a light neutral color (similar to the color of the cork), the cork starts to show thru the paint every time you put a pin in it.

 I’m not going to put time into making something only for it to turn to shit as soon as I start to use it!!

So… Since I am a fan of salvaging found items, I decided the frame wasn’t the only thing to get a new life… I was going to salvage that damaged, pieced-together cork board too and turn this into a padded, fabric covered pin board.   Here’s how…

Supplies you need:

  • Frame
  • Paint
  • Cork Board – cut to fit the frame
  • Batting – I used Soft, Medum Loft
  • Fabric
  • Ribbon – I used 3/8″ Velvet Ribbon
  • Straight Pins
  • Staple Gun & Staples
  • Upholstery tacks
  • Finishing Nails (as needed)


Steps:

1.  Pick your color palette.  One of the nice things about this project is that it can be done in any combination of colors.  When I bought all of my supplies, I had planned on creating a black and gold pin board.

 I was going to paint the frame black, and rub a gold glaze on the creases.  Then I was going to use gold buttons to tuft the board, but once I started laying everything out, I loved the black on black.  Big surprise..

I know.

2.  Sand and Paint the frame.  I used flat black primer and spray paint.

3.  Cut the layers of batting to fit the cork board.  I used 3 layers.

4.  Lay the cork board and batting face down on the back side of your fabric.  Using your staple gun, pull the fabric taught, and staple the edges to the back side of the cork board.

5.  Lay out your ribbon on the covered board.  I used straight pins to pin the ribbon in place, and make sure it was even.

6.  Flip the board over once all of the ribbons are in place, and staple the ends of the ribbons to the back side of the board.

7.  Once the fabric and ribbons are secured with staples, trim the fabric as needed.

8.  Push the upholstery tack through each point where the ribbons intersect.  FYI… back when I was still considering the black & gold color combo, I had purchased brass upholstery tacks.  When I decided to go ALL black… I simply used a high gloss black spray paint to cover the tacks before inserting them.

9.  Insert the upholstered cork into the frame.  Mine fit so snug there was nothing else for me to do… but I noticed that the former owner had used finishing nails to tack the cork to the inside of the frame.

Hang on your wall… and get to work loading it up with all of your important notes, pictures, ideas, inspirations….

whatever makes you tick!!  I’ll be on the lookout for another frame so I can make another one of these…… I’m thinking a huge one would make for an awesome vision board in my office!!!  Stay tuned for that.

 My office is a top of mind work in progress for me… so I can’t wait to bring that major project to you!!

Until then…. if you Goth It yourself projects for your home… you’ll love this Black Crushed Velvet Upholstered Stool Project or this Black Bottle with Horned Stopper Project!

Source: https://www.meandannabellee.com/gothic-diy-upholstered-pin-board/